Top

Gorbel, Free Standing Work Station Jib Crane, Model No. WSJ360-NP6-1000-10-4

$3,222.26$4,377.44

Description

0.5 ton Capacity, 10′ HUB, 4′ Span

Lead Time (subject to change, call to verify): typically ships in 10-13 business days

  • Capacity: 0.5 tons
  • Overall Height (Crane Only): 11′-11/16″
  • Height Under Boom (HUB): 10′
  • Span: 4′
  • Pipe Size: 12.75 in.
  • Enclosed Track Series: 1000
  • Overturning Moment: 5 K-FT
  • Axial Load:1.8 Kips
  • Anchor Bolt Load: 0.72 Kips
  • Hoist Trolley Included: 1 ea.
  • Thickness at Anchor Bolt: 1 1/4″
  • Hoist Allowance: 150 lbs.
  • Coverage: Circular 360 degree rotation
  • Shipping Weight (Overall Weight): 609 lbs.
  • NP6 Foundationless models are mounted to a 6 inch reinforced floor that require:
    • Centered placement on a square area that is free from cracks, seams, and walls.
    • Chemical anchor bolts that can withstand a minimum of 3,470 pounds of pull out force.
    • Concrete pressure of 3,000 psi that contains wire mesh reinforcement.
    • Designed to support tool balancers, air balancers, vacuum lifters, and hoists
  • Special foundations may be required: crane drawing will have foundation requirements
  • All Gorbel Jib Cranes are structurally designed in accordance with the AISC Steel Construction Manual.
  • All Gorbel Jib Cranes are in accordance with OSHA Specification 1910.179 and ANSI Specification B30.11, as they apply to Jib and Overhead Cranes.
  • All Gorbel Cranes meet or exceed the requirements of MMA MH27.2 specification for enclosed track systems.
  • All Work Station Cranes are in accordance with the following Canadian Standards as they apply to Overhead Cranes: CSA Standard B167-96 and CSA Standard C22.2 No.33-M1984 (reaffirmed 2004)
  • All Gorbel Jib Cranes have a design factor of 15% of the allowable capacity for hoist weight and 25% of the allowable capacity for impact.
  • Fabrication Standards: All welding is in accordance with AWS D14.1, and is performed by certified welders.
  • All holes in steel with bearing loads are either punched or drilled. Flame cut holes are not permitted in these applications.
  • Material Standards: All structural shapes used by Gorbel are a minimum of ASTM A-36 designation. All pipes are structural grade ASTM A-53 and all tubing is ASTM A-500. All plate and round bar has minimum yield strength of 36 KSI.

Additional information

Weight 609 lbs
Lift Height

Lift Capacity (In Tons)

Manufacturer

Gorbel

Addons

, , , ,

Span

4'