Description
0.05 ton Capacity, 12′ HUB, 14′ Span
Lead Time (subject to change, call to verify): typically ships in 10-13 business days
- Capacity: 0.05 tons
- Overall Height (Crane Only): 13′- 3 5/8″
- Height Under Boom (HUB): 12′
- Span: 14′
- Pipe Size: 6.63 in.
- Enclosed Track Series: 250
- Overturning Moment: 2.69 K-FT
- Axial Load:0.49 Kips
- Anchor Bolt Load: 1.23 Kips
- Hoist Trolley Included: 1 ea.
- Thickness at Anchor Bolt: 7/8″
- Hoist Allowance: 15 lbs.
- Coverage: Circular 360 degree rotation
- Shipping Weight (Overall Weight): 489 lbs.
- NP6 Foundationless models are mounted to a 6 inch reinforced floor that require:
- Centered placement on a square area that is free from cracks, seams, and walls.
- Chemical anchor bolts that can withstand a minimum of 3,470 pounds of pull out force.
- Concrete pressure of 3,000 psi that contains wire mesh reinforcement.
- Designed to support tool balancers, air balancers, vacuum lifters, and hoists
- Special foundations may be required: crane drawing will have foundation requirements
- All Gorbel Jib Cranes are structurally designed in accordance with the AISC Steel Construction Manual.
- All Gorbel Jib Cranes are in accordance with OSHA Specification 1910.179 and ANSI Specification B30.11, as they apply to Jib and Overhead Cranes.
- All Gorbel Cranes meet or exceed the requirements of MMA MH27.2 specification for enclosed track systems.
- All Work Station Cranes are in accordance with the following Canadian Standards as they apply to Overhead Cranes: CSA Standard B167-96 and CSA Standard C22.2 No.33-M1984 (reaffirmed 2004)
- All Gorbel Jib Cranes have a design factor of 15% of the allowable capacity for hoist weight and 25% of the allowable capacity for impact.
- Fabrication Standards: All welding is in accordance with AWS D14.1, and is performed by certified welders.
- All holes in steel with bearing loads are either punched or drilled. Flame cut holes are not permitted in these applications.
- Material Standards: All structural shapes used by Gorbel are a minimum of ASTM A-36 designation. All pipes are structural grade ASTM A-53 and all tubing is ASTM A-500. All plate and round bar has minimum yield strength of 36 KSI.
